Follow these easy steps to get your Zanussi ZRT 6656 Refrigerator up and running in no time.
The appliance and the interior fittings are protected for transport. Remove all packaging and any adhesive tape.
Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
Locate the appliance in a well-ventilated room, ensuring that the air openings of the cabinet are not obstructed. Avoid placing the cabinet close to sources of heat, such as a cooker, dishwasher, or radiator.
Ensure there is adequate space around the appliance for ventilation. The back of the appliance should be close to a wall but leave the required distance for ventilation.
Level the appliance by adjusting the two adjustable feet at the front of the appliance. If required, the washer can be removed.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. This appliance must be earthed.
After transporting the appliance, it must not be switched on for 2 hours. This allows the refrigerant to settle.
Plug in the appliance and switch it on at the mains supply. Turn the thermostat control to the required setting. A setting of 3 is usually suitable for normal operation.
Leave the appliance for approximately 4 hours for the correct temperature to be reached before placing food inside.